LINK Engine Management Monsoon Wire in ECU
LINK Engine Management Monsoon Wire in ECU

LINK Engine Management Monsoon Wire in ECU

Regular price
Sale price
Tax included.

If you like the value of the Atom, but are looking for a couple of extra features, then the Monsoon is the ECU for you.

With the Monsoon you have all the tuning capabilities of the Atom, but you can also choose to run some of the following features: Gearshift Control, Launch Control, Anti-lag, VVT Control and Closed Loop Boost Control. It also comes with a built in 4Bar MAP sensor further reducing installation cost.

Note: The Monsoon will run any of the above features, but it cannot run them all at once. The amount of features you can run is dependent on how many of the limited Inputs and Outputs each feature needs.

The Monsoon can control up to 2 rotors or 4 cylinders with sequential injection and direct spark. This makes it ideal for naturally aspirated or turbocharged engines that just need a retune and one or two extra features, so you don't need to jump up to one of our higher level ECUs.



4 x Digital inputs

2 x Temperature inputs

4 x Analog inputs

2 x Trigger inputs

1 x Onboard 4 Bar MAP sensor



4 x Injector drives

4 x Ignition drivers

6 x Auxiliary outputs^

+5V Sensor power supply

^unused ignition drives can be used as additional Aux outputs



1x CAN bus

1x USB tuning connection


Advanced features not found on the Atom:

Full gear shift control, antilag, rolling antilag and launch control.

Up to 2 fully variable closed loop VVT cams.


Plug in Harness

4EFTE adaptors are a complete custom plug and play solution to install a standalone Link Engine Management System to your Toyota EP82 Starlet or EP91 Glanza chassis or any model with same ecu pinout.

Adaptors can be made to suit any model ECU in the Link Engine Management range and thus allow us to provide an adaptor to suit all budgets.

Our 4EFTE adaptors are fully plug and play with no wiring required and support all factory functions such as:

  • Hi/Lo Boost Switch
  • Boost Control
  • Vehicle Speed

Adaptors are custom built to a customers specification and can include any optional extra one may need.

Popular Harness Add Ons include:


  • Oil or Fuel Pressure Sensors 
  • Link AiM MXS Strada Dash Communications 
  • Link CAN Lambda Onboard Wideband 
  • Oil Temp 
  • Ethanol Sensor
  • K20 Coil on Plug Conversion 
  • Digital Input Switch Harnesses to control functions such as Launch/Antilag etc
  • Need something not listed? Contact us and we can discuss your requirements.

Other plug in harnesses can be made to your requirements. Please contact us with your vehicle information for a price on a plug in loom for your application.

Full fitting and dyno tuning options are also available. Please add the tuning option when purchasing this ECU and we will contact you to arrange fitting and tuning on your vehicle. Please contact us prior to ordering if you need us to fit and tune this ecu without a plug in loom.